Click on the image to check the artwork
It is mainly used for measuring the enclosed volume flow in pipes of conductive liquid and slurry. Including the acid, alkali, salt and other corrosive liquid.
Product features:
1, the measurement is not affected by the fluid density, viscosity, temperature, pressure and conductivity changes;
2, the measuring tube without obstructing the flow components, no pressure loss, lower straight pipe section;
3, Series nominal diameter DN15 ~ DN3000. Sensor lining and electrode materials have a variety of options;
4, converter using a novel excitation mode, low power consumption, zero point stability, high accuracy. Flow range up to 1500:1;
5, the converter can form a shape or a separation type and sensor;
6, converter using high performance 16 bit microprocessor, 2x16LCD display, convenient parameter setting, programming and reliable;
7, flowmeter for bidirectional measurement system, in which three integrator: forward, reverse total amount and the difference amount; can be displayed. Zhuang, reverse flow, and has a variety of output: Current, pulse, digital communication, HART;
8, converter using surface mount technology (SMT), with self test and self diagnosis function;
Parameter|
Item The Specifications of electromagnetic flowmeter |
|
|
Measuring fluid |
conductive fluid |
|
Caliber |
DN10-DN3000 |
|
Electrode materials |
Mo2Ti HC HB Pt Ta Ti |
|
Lining Material |
PTFE, PFA (resistance to negative pressure), chloroprene rubber, polyurethane, hard rubber (optional conductive ground rubber ≥ DN125) |
|
Electrode Type |
Standard type 316L, scraper-type (DN ≥ 50) |
|
Dielectric conductivity |
> 5μs/cm (water> 20μs/cm) |
|
Accuracy grade |
±0.5% RS. |
|
Repeatability |
±0.1% |
|
Flow Range |
0-10m/s |
|
Maximum temperature of medium |
A size ≤ 90 , min size ≤ 180 (rubber ≤ 65 ) |
|
Temperature |
-25 - 65 |
|
Working pressure |
1.0Mpa-4.0Mpa, the special supplier overpressure |
|
Protection Level |
IP65, IP67, IP68 (optional) |
|
Output |
4-20mA current output ,0-1kHz frequency output, pulse output per unit volume |
|
Power |
220VAC 110VAC |
|
Standard |
Q/SMAU2-2006 |
|
Auxiliary converter |
BF900C/F |
|
Flange |
National standard GB9115, ANSI, JIS |
|
Installation Type |
Split, integrated |
www.chinaguiding.com/Product/3659285856.html